The UNI63D is a Twice as Fast, twin speed, digitally controlled, motorised Tube, Pipe, Square and Bar bending machine, with a maximum bend angle of 210˚.
It can bend a 90deg bend twice as quick as the rest of the range and thus opens itself up for speed in production of tube bending. It has the option of two speeds.
Speed 1: Standard 90deg bend 8-9seconds.
Speed 2: Fast 4-5seconds.
This compact and versatile machine has a capacity of up to:
Speed 1. 50mmod x 2mm Mild Steel, and Stainless Steel of 35mmod x 3mm and upto 1”1/2NB Gas Pipe.
Speed 2. 35mmod x 2mm Mild Steel, and Stainless Steel of 30mmod x 2mm and upto 1”NB Gas Pipe. Plus it can bend other more specialised materials such as CDS and T45. Contact us for advice.
The digital display is for the inputting and control of the bending angle. And you have the ability to program up to 50 memories, each holding 9 different bend angles. This is ideal for multiple but different bends along the length of a piece of tube. When in operation the machine automatically jumps to the next angle for you, so all you need to do is adjust the material to its stop, clamp it up via the quick action device and hold the two buttons while the UNI accurately performs your bend. It also has an automatic return saving you time as you can be removing the bent tube and getting the next tube ready for installation.
A Quick Action Guide/Roller Positioning device and a Foot Switch are included as standard.
The option of a smaller interchangeable drive shaft that allows you to bend as tight as a 20mm radius.
Standard bending radii is 3D & 4D. Mandrel attachment is available for bends down to 2D.
3Phase 415v only.