The H3M is a Single Ram heavy duty electric hydraulic tube/pipe bender. Capable of
producing 5000psi/350bar of bending force.
4M & 4H is Twin Ram heavy duty electric hydraulic tube/pipe bender.
5M & 5H is Three Ram extra heavy duty electric hydraulic tube/pipe bender.
Standard formers supplied for 90º bending.
5" & 6"N.B. formers are Clump type.
Castor mounted for ease of movement. (optional).
Motor voltages available - 110v, 220v 50Hz single phase or 415v 50Hz three phase.
NOTE
The 4H & 5H are 'HAND' hydraulic machines that have the same bending capacity as there 'M'
series counterparts.
TECHNICAL DATA H3M
|
| Metric |
Imperial |
| Max. Bending centres |
1104mm | 43.5" |
| Min. Bending centres |
330mm | 13" |
| Working Pressure |
351.54 KGF/cm² |
5000psi |
| Effective Ram Area |
25.8 cm² |
4 sq.ins |
| Power developed Forward |
88.68 KN | 8.9 Tons |
| Power developed Return |
26.9 KN | 2.7 Tons |
| Ram Stroke |
508mm | 20" |
TECHNICAL DATA 4M & 4H
|
| Metric |
Imperial |
| Max. Bending centres |
1524mm | 60" |
| Min. Bending centres |
610mm | 24" |
| Working Pressure |
351.54 KGF/cm² |
5000psi |
| Effective Ram Area |
51.6 cm² |
8 sq.ins |
| Power developed Forward |
177.36 KN |
17.8 Tons |
| Power developed Return |
53.81 KN | 5.4 Tons |
| Ram Stroke |
508mm | 20" |
TECHNICAL DATA 5M & 5H
|
| Metric |
Imperial |
| Max. Bending centres |
1524mm | 60" |
| Min. Bending centres |
610mm | 24" |
| Working Pressure |
351.54 KGF/cm² |
5000psi |
| Effective Ram Area |
77.4 cm² |
12 sq.ins |
| Power developed Forward |
276 KN | 27.7 Tons |
| Power developed Return |
80.71 KN | 8.1 Tons |
| Ram Stroke |
508mm | 20" |
Back to Menu
|
