15 - 42mm (1/2" - 1½")
This portable hand operated Tube bender is ideal for your plumbing, Electrical (conduit), Maintenance, and fabrication requirements. Quick and easy to use, it provides the user with versatile tube bending and comfortable foot bracing to counteract the bending torque.
Features
Bench/ Vice Mount, T7BM available, see below.
Quick and variable roller guide adjustment. No lengthy screw or heavy slide arm to contend with. You simply pull out the retaining pin and locate the slide assembly for the size of tube you wish to bend. You may then fine adjust the slide assembly to acquire the perfect bend.
Quick adjustable tube stop, or optional Strap & Pin for really close 'off sets'. One per former size.
Easy Conduit & Nominal Bore tubebending as the T7 only requires a grooved roller, no guides.
Optional Pipe Vice.
Formers and Guides
The T7, depending upon application comes with either Steel guides, for steel tube, or Aluminium guides for copper and aluminium tube.
The Formers are machined from cast iron to ensure bending consistency and long life.
NOTE : T7's maximum capacity in either Stainless steel or Mild steel = 35mm or 1 3/8".
T7 BENCH / VICE MOUNT
Ideal for factory use where you can securely fix it to a bench for a permanent location.
Formers, Guides and ancillaries interchangeable with the Stand version.
Standard Bending Radius Details
| Tube Size | 1/2" / 15mm | 3/4" / 22mm | 1" / 28mm | 1 1/4" / 35mm | 1 1/2" / 42mm |
| C.L.Radii | 51mm | 76mm | 102mm | 140mm | 155mm |
15 - 54mm (1/2" - 21/8")
It's so EASY with a Ratchet tubebender.
For all your tubebending requirements for Copper, Stainless Steel, Aluminium, Conduit, Mild Steel Tube.
The Tubela Ratchet principle makes your life easy. It provides you with a mechanical advantage to bend Steel and Stainless Steel tube upto 54mm O.D. 'SINGLE HANDED', and without and extension handle.
The Portable S1 Stand or the Bench/Vice Mount enables HORIZONTAL BENDING, which allows full length tube to be bent.
High strength machined cast iron formers and steel guides ensure consistent bending and a long life.
RATCHET BENCH / VICE MOUNT
Ideal for factory use where you can securely fix it to a bench for a permanent location.
Formers, Guides and ancillaries interchangeable with the Stand version.
Standard Bending Radius Details
| Tube Size | 1/2" / 15mm | 3/4" / 22mm | 1" / 28mm | 1 1/4" / 35mm | 1 1/2" / 42mm | 2" / 54mm |
| C.L.Radii | 51mm | 76mm | 102mm | 140mm | 155mm | 205mm |
Back HOME